Stainless Steel Dutch Twilled Weave

Stainless Steel Mesh - Dutch Twilled Weave

Twill dutch weave: “Twill” indicates the warp and weft wires pass alternately above two and below two wires. “Dutch” refers to the use of a heavier warp wire diameter in conjunction with a lighter weft wire diameter. This weave shows a combination of twill and dutch weave.

The specifications listed below are commonly required.

Specification List of Twill dutch Wire Mesh

Mesh/Inch Warp ×Weft	Wire Dia Warp ×Weft mm	Nominal Filtration Fineness μm	Section Area %	Weight kg/m 2	Thickness mm
20×270	0.25×0.2	119	17.6	3.14	0.65
20×200	0.355×0.28	118	12.1	4.58	0.915
24×300	0.28×0.18	110	19.6	3.01	0.64
20×150	0.45×0.355	101	7.5	6.02	1.16
30×340	0.28×0.16	89	17.9	2.84	0.60
30×270	0.28×0.20	77	11.2	3.41	0.68
40×540	0.18×0.10	70	23.5	1.73	0.38
40×430	0.18×0.125	63	15.4	2.09	0.43
50×600	0.125×0.09	51	17.2	1.47	0.305
50×500	0.14×0.11	47	12	1.83	0.364
65×600	0.14×0.09	36	12	1.59	0.32
70×600	0.14×0.09	31	10.1	1.61	0.32
78×760	0.112×0.071	31	13.5	1.25	0.254
78×680	0.112×0.08	29	10.3	1.37	0.272
80×680	0.112×0.08	28	9.8	1.38	0.272
90×850	0.10×0.063	26	12.7	1.12	0.226
90×760	0.10×0.071	24	9.6	1.23	0.242
100×850	0.10×0.063	22	10	1.14	0.226
130×1500	0.063×0.036	21	18.6	0.64	0.135
100×760	0.10×0.071	20	7.4	1.25	0.242
130×1200	0.071×0.045	18	12	0.80	0.161
130×1100	0.071×0.05	17	9.4	0.87	0.171
150×1400	0.063×0.04	15	11.4	0.71	0.143
160×1500	0.063×0.036	15	12.4	0.67	0.135
165×1500	0.063×0.036	14	11.4	0.67	0.135
174×1700	0.063×0.032	13	12.9	0.62	0.127
165×1400	0.063×0.04	13	8.8	0.73	0.143
174×1400	0.063×0.04	11	7.4	0.74	0.143
203×1600	0.05×0.032	10	9.3	0.58	0.114
216×1800	0.045×0.03	10	9.4	0.53	0.105
203×1500	0.056×0.036	9	6.2	0.67	0.128
250×1900	0.04×0.028	8	7.8	0.51	0.096
250×1600	0.05×0.032	8	3.8	0.63	0.114
285×2100	0.036×0.025	7	7.2	0.44	0.086
300×2100	0.036×0.025	6	6.0	0.44	0.086
317×2100	0.036×0.025	5	4.7	0.44	0.086
325×2300	0.036×0.024	4	4.2	0.44	0.086
363×2300	0.032×0.022	4	4.5	0.40	0.076
400×2700	0.028×0.02	4	4.7	0.36	0.068
500×3500	0.025×0.015	3	4.9	0.30	0.055